Front

• 1). Open the hood and reach down behind the headlamp housing.
  
  
• 2). Grab the turn-signal socket and twist it counterclockwise until you feel it release from the retaining ring. Pull the socket out gently to expose the bulb. Pull the old bulb out by hand and insert the replacement bulb.
  
  
• 3). Push the socket back into the hole in the back of the headlamp housing, making sure to line up the retaining tabs with the slots in the retaining ring. Twist the socket clockwise until it locks in place.
  
  

Rear

• 1). Raise the hatchback door. Slip your fingers beneath the lip of the trim panel that covers the backside of the tail-lamp housing. Pull the trim away gently. Set the trim aside
  
  
• 2). Grab the turn-signal socket and twist it counter clockwise until it comes free of the retaining ring. Pull the socket out of the tail-lamp housing. Pull the old bulb out by hand and insert the new one.
  
  
• 3). Push the socket back into the taillight housing and line the retaining tabs up with the slots in the retaining ring. Twist the socket clockwise until it locks into place. Line the retaining tabs on the trim panel with the retaining slots and push the trim back into place.