How to Change the Headlamp on a Chevy Uplander
- 1). Park the vehicle and turn off the engine. Open and secure the hood of the Uplander and put on the clean gloves.
- 2). Remove the headlamp retainer pin by rotating it toward the headlamp assembly and pulling it out. Use the screwdriver to remove the screw from the top of the headlamp assembly.
- 3). Pull the assembly out of the vehicle and disconnect the socket wiring harness connector from the rear of the assembly.
- 4). Rotate the bulb socket counterclockwise to remove it from the assembly.
- 5). Disconnect the bulb socket wiring harness from the old bulb by pulling it off. Place the wiring harness onto the replacement bulb.
- 6). Reinstall and secure the bulb socket by inserting it into the bulb assembly and rotating it clockwise.
- 7). Reconnect the socket wiring harness connector to the rear of the assembly and place it back into the Uplander.
- 8). Reattach the screw on top of the headlamp assembly and reattach the retainer pin. Close the hood.
