How to Refill PK Cartridges
- 1). Spread several layers of paper towels or old newspapers on a table or floor. Select an even surface to work on.
- 2). Locate the ink tank on the PK cartridge. Take the thumb drill and drill a hole on the top of the cartridge ink tank.
- 3). Insert the syringe's needle into the ink bottle and draw ink. Now insert the syringe's needle into the drilled hole on the cartridge's ink tank. Fill the tank slowly or you may have to deal with a spill.
- 4). Remove the syringe's needle from the tank. Clean the cartridge using a paper towel. Now put a small piece of duct tape over the tiny hole you drilled into the cartridge.
- 5). Place the PK cartridge back inside the paper and run a few test prints.
