How to Change a Cabin Air Filter in a Hummer
- 1). Find and remove the screws that are securing the panel that is covering access to the air filter with the nut driver. The screws are located under the glove box on the passenger side of the vehicle.
- 2). Set the panel aside. Locate the access door for the cabin filter that was under the panel.
- 3). Remove the screw that is used to secure the access door with the screwdriver. Set the screw aside so you do not lose it.
- 4). Open the door and pull out the first filter. Pull out any additional filters that are inside the compartment.
- 5). Take the new filters out of the package and insert them into the filter compartment.
- 6). Close the access door and then replace the screw. Tighten the screw to secure the door.
- 7). Set the panel back into place and secure it with the screws.
