Best Ways To Remove Rust From a Car Engine
Everybody knows that a car's life depends on the engine.
This is the most integral part of any moving vehicle.
It is the source of power that makes the car move and transports us to our destinations.
And this is the very reason why we instinctively keep our car engine in excellent condition.
However, no matter how careful we try, the engine goes kaput.
And more often than not, the culprit is rust.
Removing rust from the engine can be very tricky.
In addition, there are not too many ways to do it.
More often than not, you have to physically and completely take out every single part of the engine before you can even treat each part individually.
The two easiest ways of removing rust from your car engine is either by sandblasting or by using a high pressure washer heated at about 3000 PSI.
The only drawback is that you will be jeopardizing your alternator and replacing it can be very costly.
Another suggested easy way to remove rust off the car engine is by directly spraying the affected area with natural auto rust remover.
You have to let the solution settle for about five or ten minutes before you can remove the rust using water and rag or stiff nylon brush.
Some people even suggested and actually tried pouring a bottle of Coke over the rusted engine.
Then after soaking it for a few minutes, they scrub the rust off with a stiff nylon bristled brush and wash the rust off with water.
This may sound very strange but these people claim that indeed it really works brilliantly! But in case you want to do the conventional way of removing rust, be prepared to tear down each part of your car engine.
This method requires Evapo-Rust (a safe and biodegradable rust removing product), some rag and a large container.
First, you have to disassemble the engine to clean it as much as possible and to wash down all loose debris and grime.
Then pour the Evapo-Rust in a large container and completely submerge the rusted parts of the engine.
Allow them to soak for about two to 24 hours depending on the severity of rust.
Then remove the engine parts from the solution and check if all the rust has been completely removed.
Wash them off and buff the engine dry using the rag or clean cloth.
This is the most integral part of any moving vehicle.
It is the source of power that makes the car move and transports us to our destinations.
And this is the very reason why we instinctively keep our car engine in excellent condition.
However, no matter how careful we try, the engine goes kaput.
And more often than not, the culprit is rust.
Removing rust from the engine can be very tricky.
In addition, there are not too many ways to do it.
More often than not, you have to physically and completely take out every single part of the engine before you can even treat each part individually.
The two easiest ways of removing rust from your car engine is either by sandblasting or by using a high pressure washer heated at about 3000 PSI.
The only drawback is that you will be jeopardizing your alternator and replacing it can be very costly.
Another suggested easy way to remove rust off the car engine is by directly spraying the affected area with natural auto rust remover.
You have to let the solution settle for about five or ten minutes before you can remove the rust using water and rag or stiff nylon brush.
Some people even suggested and actually tried pouring a bottle of Coke over the rusted engine.
Then after soaking it for a few minutes, they scrub the rust off with a stiff nylon bristled brush and wash the rust off with water.
This may sound very strange but these people claim that indeed it really works brilliantly! But in case you want to do the conventional way of removing rust, be prepared to tear down each part of your car engine.
This method requires Evapo-Rust (a safe and biodegradable rust removing product), some rag and a large container.
First, you have to disassemble the engine to clean it as much as possible and to wash down all loose debris and grime.
Then pour the Evapo-Rust in a large container and completely submerge the rusted parts of the engine.
Allow them to soak for about two to 24 hours depending on the severity of rust.
Then remove the engine parts from the solution and check if all the rust has been completely removed.
Wash them off and buff the engine dry using the rag or clean cloth.
