How to Dry Electrodes
- 1). Once you have completed the manufacturer's recommended cleaning procedure (which you should always follow to avoid damaging the electrode) place the electrode on a secure debris free work area on top of a clean lint free paper towel. It is very important that care is used to avoid scratching any membrane the electrode may have or spilling any internal fluid that needs to be present. Use a spare clean paper towel to remove excess moisture on the outside of the electrode.
- 2). Take the beaker and place it near the electrode. You will be using this beaker to provide an area where you can work without dust and liquid concerns. Take the electrode and place it into the beaker carefully. While holding the electrode in the beaker use the water bottle to gently spray the electrode to remove any debris. Use this water liberally as more cannot hurt the electrode and will serve to help thoroughly clean it.
- 3). Blot the electrode dry with a clean lint free paper towel. Use care to avoid applying pressure or touching any membrane that may be present. Now use the spray bottle with methanol and repeat Step 2.
- 4). Ensure the electrode is dry by using a lint free paper towel. You electrode should now be free of any cleaning solutions and ready for complete drying. If your manufacturer recommends using a heating oven to dry you electrode place it into the oven for the recommended amount of time. Some electrodes can easily withstand the heat while others cannot be used in an oven. Do not use the oven unless you are absolutely sure that no harm will come to your electrode.
- 5). If you cannot use the oven to dry your electrode just blot it dry with a number of lint free paper towels. Allow your electrode to stand for about five minutes and then store it according to the manufacturer's suggested storing procedure. Proper storage is of utmost importance as some sensitive electrodes can stop working if stored improperly.
