How to Plant a Bare Root Tree
- 1). Dig your planting hole before you get the tree home. Dig so that the sides of the hole taper outward without smoothing the walls.
- 2). Make the hole deep enough to accommodate roots without crowding. Allow 1.2 times the width and depth of the root system, but not so large that the plant will sink or settle too much.
- 3). Line the hole with 4-6 inches of 1 part native soil and 3 parts organic conditioners (such as peat moss).
- 4). Add a cone of "root zone" soil (an even blend of organic and native soils) as a bed for the root system.
- 5). Drive the stake 6-8 inches into the ground, leaning in the direction of prevailing winds for support.
- 6). Spread the roots manually over the soil cone, pruning out any broken roots to ensure that the plant sits straight and even.
- 7). Fill the hole 2/3 full with "root zone" soil mix.
- 8). Adjust the trunk so the bud union, the area where the tree begins to branch, is 2 inches above ground line.
- 9). Tie the tree to the stake in 2 or 3 places with garden twists or cloth.
- 10
Water the area generously to settle the soil. If the tree settles too low, adjust it with root zone soil.
