How to Lubricate a Maytag Dryer
- 1). Unplug your dryer and move it away from the wall.
- 2). Remove the screws on the bottom of the front panel.
- 3). Lift the panel up from the bottom. This will release the top clips.
- 4). Unplug the wiring harness from the port behind the front panel and remove the front panel completely.
- 5). Remove the screws on the metal bulkhead. Remove the metal bulkhead from the cabinet. You will now have access to the motor assembly. Notice the belt wheel on the motor.
- 6). Add a couple drops of industrial lubricant or machine oil to the bearings on the belt wheel.
- 7). Replace the bulkhead and front panel of the dryer.
