How to Make a Leaf Bag Holder That Works
- 1). Flip a 55-gallon plastic drum upside down and cut the bottom out of the drum with a keyhole saw. Push the tip of the keyhole saw into the plastic and then use the serrated edge to cut out the plastic bottom.
- 2). Sand any rough edges where you cut, with a file. Smooth edges will prevent the edges for catching and tearing the leaf bag.
- 3). Place the cut end of the drum back onto the ground and place a 75-gallon bag into the container. Roll the top of the bag over the top edge of the drum until the bottom of the bag rests against the ground.
- 4). Tie a nylon cord around the top edge of the drum to keep the bag secured to the drum while you fill it. If you can locate one, you can use a large rubber band instead.
