How to Applique With One-Sided Fusible Webbing
- 1). Trace your pattern pieces on the paper side of the fusible webbing with a marking pen or pencil. Keep in mind that the pattern will be reversed. Use a light box if desired for a clear image.
- 2). Cut out each of the pattern pieces from the fusible webbing. Cut approximately 1/4 inch from the outside of the traced lines. You will cut on the traced lines in a later step.
- 3). Lay out your chosen fabric with the wrong side up on the ironing board. Place the pattern pieces on the fabric with the paper side up. Press with a medium/hot dry iron.
- 4). Allow the fabric and webbing to cool. Cut out the shape on the tracing lines. Use sharp scissors and cut carefully to avoid fraying of the edges.
- 5). Peel the paper backing off of the pattern piece. A layer of adhesive from the fusible webbing will remain on the fabric.
- 6). Place your applique cut-out onto your chosen fabric with the adhesive side down and fabric right side up. Press with the medium/hot iron until fabrics are completely fused, or approximately 30 seconds.
- 7). Allow your project to cool completely. Stitch around the edges using a blanket stitch if stitching by hand, and a zig zag stitch if using a sewing machine.
