How to Clean Shower Glass
- 1). Use an acidic cleaner to remove calcium deposits left by hard water. Use lemon juice or vinegar as an alternative to commercial products, as they produce good results, are free of harmful chemicals and are readily available in your kitchen. Saturate a damp cloth with undiluted distilled white vinegar or lemon juice.
- 2). Apply the cloth to any area that exhibits buildup of hard-water deposits. Leave in place for 15 to 20 minutes to allow the vinegar to break up the deposits. For difficult areas or vertical surfaces, fill a spray bottle with vinegar or lemon juice and wet the surface with the solution. Repeat as necessary until the solution dissolves the mineral deposits.
- 3). Scrub the areas with an old toothbrush or a stiff-bristled cleaning brush. A discarded electric toothbrush works well, as the circular motion lifts the deposits as it scrubs. Rinse with clear water and wipe dry.
- 1). Remove soap scum with shampoo. Shampoo designed to remove oils from hair works also breaks up the oils that cause the soap scum to adhere to the shower door. This is a great way to use up those bottles of shampoo you purchased but never used, or to use the remnants in the bottom of the bottle.
- 2). Apply generous amounts of shampoo to a damp sponge or cloth and apply to the trouble spot. Work it in well and allow it to set for 15 to 20 minutes to break up the oils. Test for progress by scraping a small section with your fingernail. When residue is soft and comes off easily, it is time to begin cleaning.
- 3). Scrub with a brush to loosen and lift the soap scum from the glass. Use the scrubby side of a kitchen or bathroom sponge to remove all traces of soap scum. Rinse with water to remove residue.
- 4). Wipe down the doors with a soft cloth. Spray with undiluted rubbing alcohol and wipe to a shine. Maintain a regular schedule of cleaning to prevent the buildup of soap scum or hard-water deposits.
