How to Install a Snow Plow on a Poulan Lawn Tractor
- 1). Park your Poulan lawn tractor on a level spot.
- 2). Position the snowplow in front of the Poulan lawn tractor frame. Ask a friend to hold the plow up so the snowplow bracket lines up with the pre-drilled holes on the front of the Poulan lawn tractor frame.
- 3). Insert any spacers needed to make the bracket tight against the Poulan lawn tractor frame. Four to six spacers usually come with the snowplow to fit a variety of lawn tractor frames.
- 4). Place the bolts that come with the snowplow through each side of the snowplow bracket and Poulan lawn tractor frame. Tighten a nut on the backside of each bolt. Four bolts are usually on each side of the snow plow bracket.
- 5). Unscrew the center bolt on the snowplow to adjust the height of the snowplow so it is flush with the ground. Screw the bolt back in once you set the plow to the correct height.
