Readjusting Vertical Panels

• 1). Realign a vertical blind by taking it out and reinserting it into the bracket that holds it in place. Slide a credit card, or another type of small plastic card into the top of the bracket. Do this on the side where the cord is hanging. This will unhook the catch that is retaining the blind so you can take this side of the blind out of the bracket.
  
  
• 2). Pull the chain on the side of the blind so the hooks realign. Reinsert the blind into the bracket.
  
  
• 3). Tap the rod for the blinds gently with your finger to adjust a chain that is not pulling with ease. This will loosen the push nut on the other side of the headrail that is located on the top of the blind. The chain should now pull smoothly.
  
  

Adjusting the Space Between Panels

• 1). Reduce gaps between the vertical blinds by removing the spacers in between the vertical blinds with a screwdriver. Spacers are small plastic pieces that separate each of the blinds. They are positioned at the top of the vertical blind between each panel.
  
  
• 2). Insert the screwdriver in the spacer and apply pressure to it, allowing it to slip off. Remove each of the spacers and keep them in a safe place in case you want to replace them later.
  
  
• 3). Pull the cord to completely close the panels and turn them so no light shines through. The blinds should now hang close together, overlapping a bit so you have complete darkness in the room when they are closed.