How to Make Reflective Buttons
- 1). Lay your towel on a flat surface. Use a surface such as a garage floor or cement slab that you don't mind getting dirty.
- 2). Place your buttons face up on the towel and spread them 1 inch apart.
- 3). Shake the spray paint can and place the spray nozzle 6 to 8 inches above the buttons. In a sweeping-like motion, spray the buttons, going back and forth until the buttons are completely covered.
- 4). Let the buttons dry for 30 minutes.
- 5). Flip the buttons over and repeat Steps 3 and 4.
- 6). Fasten the buttons onto a vest, jacket or sleeve cuffs.
