Shelves

• 1). Lift the shelf up from the pegs it's resting on and pull it free.
  
  
• 2). Remove the four pegs and stick them into the vertical section's peg-holes in a new location in the California Closet.
  
  
• 3). Slide the shelf between the vertical components and set it gently down onto the pegs.
  
  

Clothing Rods

• 1). Pull the wooden dowel up and out of its end-piece connectors.
  
  
• 2). Slip the plastic end-pieces out of the peg-holes and reposition them elsewhere in the California Closet, keeping the two ends at the same height.
  
  
• 3). Snap the rod back into place.
  
  

Drawers

• 1). Pull the drawer all the way out. Lift it up and slide it free of the rail to remove it.
  
  
• 2). Unscrew the drawer rails from the peg-holes and re-install them in a new location in the California Closet.
  
  
• 3). Slide the drawer back onto its rails. Set the back end down first, and then push it both down and inward until it rests securely on the track.