Building Garage Shelving For Under $200
A garage is a place where items are stored that don't belong in the house because they are either poisonous, unsightly, or pertain to the exterior of the home.
However, keeping things stacked in boxes and littered around the walls of a garage is no way to go.
Building garage shelving for this room can help keep this area more organized, help someone store more items, and can be done for under $200.
When undertaking the building process, the first way people can save a buck is by doing it themselves and not hiring an independent contractor.
Thankfully, building garage shelves is not that challenging of a project.
The first thing to do is to decide where the shelves are going to go and how many are going to need to be installed.
Then measure once, measure twice, and measure a third time so you know the cuts of wood that will be needed.
The next step is getting the cuts of wood from a lumber yard or a home improvement store like Home Depot or Lowe's.
Check the integrity of the wood that is selected and remember that not all types of wood are the same.
Make sure that any boards chosen are not warped and have no structural damage in the cut itself.
Then take them to the cutting area and have them cut according to the measurements previously taken.
After the wood is seen to, the next thing to do is to get the shelf brackets that will be fixed to the wall.
The brackets can be found at any home improvement outlet and look like little metal boomerangs.
Make sure that long screws and anchors are either included with the brackets or purchased separate.
Then take all the material back to the garage and get the tools needed ready.
Finally, installing them on the wall is another easy part of the process.
People should put one board on the wall to act as a base to anchor the shelves on.
This is because dry wall will not hold nails and screws as well if the items placed on the shelves are too heavy.
Nail the boards into the studs behind the dry wall, anchor the brackets to the boards making sure their level, and attach shelves on top of the brackets.
Before tightening everything, be sure to use a level to check that the shelves are in fact leveled off.
Building garage shelving is an easy home improvement project that if researched correctly can take as short as a half hour.
Once the measuring and planning is finished, it is really all downhill from there.
Get the material mentioned from a hardware store, anchor base boards to studs, and hang the brackets making sure they're level.
This is one of the easier do-it-yourself home improvement jobs around and is something that anyone who can wield a screw gun is capable of completing.
However, keeping things stacked in boxes and littered around the walls of a garage is no way to go.
Building garage shelving for this room can help keep this area more organized, help someone store more items, and can be done for under $200.
When undertaking the building process, the first way people can save a buck is by doing it themselves and not hiring an independent contractor.
Thankfully, building garage shelves is not that challenging of a project.
The first thing to do is to decide where the shelves are going to go and how many are going to need to be installed.
Then measure once, measure twice, and measure a third time so you know the cuts of wood that will be needed.
The next step is getting the cuts of wood from a lumber yard or a home improvement store like Home Depot or Lowe's.
Check the integrity of the wood that is selected and remember that not all types of wood are the same.
Make sure that any boards chosen are not warped and have no structural damage in the cut itself.
Then take them to the cutting area and have them cut according to the measurements previously taken.
After the wood is seen to, the next thing to do is to get the shelf brackets that will be fixed to the wall.
The brackets can be found at any home improvement outlet and look like little metal boomerangs.
Make sure that long screws and anchors are either included with the brackets or purchased separate.
Then take all the material back to the garage and get the tools needed ready.
Finally, installing them on the wall is another easy part of the process.
People should put one board on the wall to act as a base to anchor the shelves on.
This is because dry wall will not hold nails and screws as well if the items placed on the shelves are too heavy.
Nail the boards into the studs behind the dry wall, anchor the brackets to the boards making sure their level, and attach shelves on top of the brackets.
Before tightening everything, be sure to use a level to check that the shelves are in fact leveled off.
Building garage shelving is an easy home improvement project that if researched correctly can take as short as a half hour.
Once the measuring and planning is finished, it is really all downhill from there.
Get the material mentioned from a hardware store, anchor base boards to studs, and hang the brackets making sure they're level.
This is one of the easier do-it-yourself home improvement jobs around and is something that anyone who can wield a screw gun is capable of completing.
