3Doodler: Fun But Strange 3D Pen!
Today it has been seen that 3D printing is very common as only you have to hit on the computer button after that it sends file to printer that produce small 3D object of plastic. However in comparison to that, 3Doodler has arrived which is a pen like structure that turns into a 3D printer. It will cost you $99 which is made up of Boston based startup Woobleworks. You will find this little bit fat but it is not a hot glue gun. It requires to be plugged into a wall outlet after which a stick of plastic goes at the end and again comes out which is melted at the tip. While you move your hands, it leaves a thin trail of cooling plastic. You can move this pen with a plan by laying down string upon string and after that the object takes the shapes. You will find this pen is very easy to use as it gets started within a few hours. With the help of this pen, you can make some rings or a sculpture of walking man.
After making the thing from this amazing pen, all the objects looks unique and excellent to them. All they are jumbled with fused plastic wire but it is quite hard to make anything useful. The company which has made this pen 3Doodler has instructed that first you should make paper clips and be sure that you will have the paper clips but at the same time all looks like as you have never seen before. You can cut wood; machine metal and can mold clay but plastic which is present everywhere has been out of reach. It will look very beautiful along with colorful and easy to shape.
The pen which you will use may sometimes not be able to feed the last stick and therefore when the plastic stops coming of the pen. After that when the new stick is inserting, and then dozen inches of plastic from the old ones comes out first. This makes very difficult to change colors without waste but 3Doodlers will want more than an open for multi-color projects. You may find some difficult in this types but in the next generation of pens, it should be better. The 3Doodler is much better and simpler machine than 3D printer. You can compare this 3Doodler pen with some other printer but you will not find any single usable thing. 3Doodler on the other hand is at low risk. It is very easy to play with and in spite of the markup of plastic, pretty good value will be there if you have your kid's pr have an artistic sense.
After making the thing from this amazing pen, all the objects looks unique and excellent to them. All they are jumbled with fused plastic wire but it is quite hard to make anything useful. The company which has made this pen 3Doodler has instructed that first you should make paper clips and be sure that you will have the paper clips but at the same time all looks like as you have never seen before. You can cut wood; machine metal and can mold clay but plastic which is present everywhere has been out of reach. It will look very beautiful along with colorful and easy to shape.
The pen which you will use may sometimes not be able to feed the last stick and therefore when the plastic stops coming of the pen. After that when the new stick is inserting, and then dozen inches of plastic from the old ones comes out first. This makes very difficult to change colors without waste but 3Doodlers will want more than an open for multi-color projects. You may find some difficult in this types but in the next generation of pens, it should be better. The 3Doodler is much better and simpler machine than 3D printer. You can compare this 3Doodler pen with some other printer but you will not find any single usable thing. 3Doodler on the other hand is at low risk. It is very easy to play with and in spite of the markup of plastic, pretty good value will be there if you have your kid's pr have an artistic sense.
