How to Program a Philips Universal Remote Cl035a
- 1). Turn on the TV or other device that you'll be using with the universal remote.
- 2). Hold down the remote's “Setup” key until the red light on the universal remote stays on. This will take about five seconds. Release “Setup” after the light stays on.
- 3). Press the button at the top of the Philips remote that corresponds to the electronic device you turned on. Then, point the head of the remote at the device.
- 4). Press “Channel Up” on the right side of the remote repeatedly, going through each of the remote's codes until the device turns off. You may have to press “Channel Up” hundreds of times (up to 300) before the device shuts down.
- 5). Press “Mute” on the remote to install the device's code.
