How to choose a straightener?

Instruction
1 Note on by coating plates, because it depends on them the possible impact on the structure of your hair. Straightener with simple metal plastic on Eat a lot cheaper, but the IC on such hair straightener the tips of your hair instantly on chute split. Make sure that the plates were with some on the indoor, for example ceramic. If you plan to for ADDITIONAL EC on loved cosmetics when laying hair , choose a hair straightener mixed on coated, for example ceramics with Teflon or ceramic tourmaline. This hair straightener will give your hair shine am, and at the IP on provide easy sliding.
2 Check whether there is a Best straightener for hair that you are going to buy, the function of ionization. About to very to climb on to the health of your hair. Ions, which on a plate covered with, do not give hair desiccate am and electrify.
3 Determine the width of the plate. Wide (more than 2.5 cm.) on for thick and long hair. Narrow same (2-2.5 cm.) - Universal, they are on for all it on in the hair. In addition to on the strength of narrow plates can easily be not only to straighten hair s, and curl them.
4 Ties on yet of temperature modes of the instrument. It is important that the temperature on heating the can be chosen independently. For thin and weakened hair to reach a low temperature, and for much the temperature shall be climbing to be over 200 degrees, but for this regime has not at all hair straighteners.
5 Pay attention to the speed on the heating of the hair straightener. Most hair straighteners on the heated very quickly, in just 10-15 minutes.
6 Check the unit for safety. In some hair straighteners have on the edges of special cold zone, which on can prevent burns.
7 Note whether to hair straightener this model for laying wet hair. This one will allow to reduce the thermal effect on the hair s, and you do not have to in the beginning dry the hair dryer, and then straighten them.
8 Do not forget to take an interest in a storage unit. Usually hair straighteners provided for fixing plates. Proper storage with for proper durability of the device.