How do I Troubleshoot a Balboa 2000LE Hot Tub?
- 1). Shut off the circuit on your home's breaker box that supplies power to your Balboa 2000LE system. Flip the Balboa's service disconnect box's "ON/OFF" switch to the "Off" position.
- 2). Examine the wiring between your Balboa 2000LE and its service disconnect box. If you notice any loose or damaged wires or wire terminals, contact your local Balboa installer to have new components installed.
- 3). Check for a blown fuse inside of the Balboa 2000LEs control box, while the system is still powered off. Remove the control box's casing, using a Philips head screwdriver to remove the supporting screws.
- 4). Examine the control board's fuses to determine if any of the fuses are blown. There are two fuses on the left side of the board, one near the top right and a forth fuse near the bottom center of the board. Replace any blown fuses.
- 5). Replace the control box's cover and screws.
