JN0-532 exam dumps
JN0-532 Exam
VPNs
Identify IKE Phase 1/Phase2 negotiation sequence and proposals
Identify/differentiate IPSec standard elements (encapsulations, SA, SPI, etc.) List steps for policy-based/route-based VPN configuration
Relate proxy-ID to VPN setup
Identify proper configuration for various hub/spoke configurations (policy, int. placement, etc.)
Identify NHTB requirements/configurations
Configure/verify AC-VPNs
Identify PKI components (certificates, CDL, etc.)
List steps for PKI implementation w/ VPNs
VPN Variations
Configure Dynamic Peer VPNs
Configure Transparent mode VPNs
Configure Overlapping Networks
Describe GRE applications/Configure GRE
Testinside is the leader in IT Certifications that will Guarantee you will pass your JN0-532 exam on Your First Try. We have provided a free JN0-532 exam dumps where you will be able to see the quality that goes into our JN0-532 test questions.
JN0-532 Exam
Juniper Networks Certified Internet Specialist, FWV (JNCIS-FWV)
Exam Number/Code : JN0-532
Exam Name : Juniper Networks Certified Internet Specialist, FWV (JNCIS-FWV)
Questions and Answers : 151 Q&As
Update Time: 2010-10-26
Testinside JN0-532 study guide will introduce you to the core logic of various subjects so that you not only learn, but you also understand various technologies and subjects. We guarantee that using our JN0-532 practice test will adequately prepare you for your JN0-532 exam, and set you up to pass your JN0-532 exam the First Time.
Testinside JN0-532 study materials are comprehensive, yet affordable. We are aware that a major problem in the IT industry is a lack of quality JN0-532 study guides. Testinside JN0-532 exam test questions provides you everything you will need to take the JN0-532 exam. Testinside JN0-532 test questions have comprehensive questions, with verified answers researched by industry experts.
JN0-532 rapidshare 1. Review the exhibit.
You've been asked to build a route-based hub and spoke network, with policy control for traffic travelling from spoke to spoke. Which two of the following configuration options will meet this requirement? (Choose two.)
A. Place the spoke tunnel interfaces in the trust zone and create policies on the spokes.
B. Place the spoke tunnel interfaces in the untrust zone and create policies on the spokes.
C. Create a single tunnel interface in the trust zone at the hub and enable intra-zone blocking.
D. Create separate tunnel interfaces at the hub and place them in different zones, then create policies at the hub.
Answer: BD
2. You have created a virtual router called VSYSA-vr and made it shareable. You then create the VSYS using the WebUI, telling it to use an existing VR and selecting the VR called VSYSA-vr.
What is the status of the virtual router after you create the VSYS?
A. The router will be the default router but will no longer be shared.
B. The router will be the default router and will still have a shareable status.
C. The system will not let you use a shared virtual router when you create a new VSYS. The initial virtual router must be private.
D. The system will not create a private vr for the VSYS but will assign the untrust-vr as the default router. The shared Virtual router will not be the default router.
Answer: B
VPNs
Identify IKE Phase 1/Phase2 negotiation sequence and proposals
Identify/differentiate IPSec standard elements (encapsulations, SA, SPI, etc.) List steps for policy-based/route-based VPN configuration
Relate proxy-ID to VPN setup
Identify proper configuration for various hub/spoke configurations (policy, int. placement, etc.)
Identify NHTB requirements/configurations
Configure/verify AC-VPNs
Identify PKI components (certificates, CDL, etc.)
List steps for PKI implementation w/ VPNs
VPN Variations
Configure Dynamic Peer VPNs
Configure Transparent mode VPNs
Configure Overlapping Networks
Describe GRE applications/Configure GRE
Testinside is the leader in IT Certifications that will Guarantee you will pass your JN0-532 exam on Your First Try. We have provided a free JN0-532 exam dumps where you will be able to see the quality that goes into our JN0-532 test questions.
JN0-532 Exam
Juniper Networks Certified Internet Specialist, FWV (JNCIS-FWV)
Exam Number/Code : JN0-532
Exam Name : Juniper Networks Certified Internet Specialist, FWV (JNCIS-FWV)
Questions and Answers : 151 Q&As
Update Time: 2010-10-26
Testinside JN0-532 study guide will introduce you to the core logic of various subjects so that you not only learn, but you also understand various technologies and subjects. We guarantee that using our JN0-532 practice test will adequately prepare you for your JN0-532 exam, and set you up to pass your JN0-532 exam the First Time.
Testinside JN0-532 study materials are comprehensive, yet affordable. We are aware that a major problem in the IT industry is a lack of quality JN0-532 study guides. Testinside JN0-532 exam test questions provides you everything you will need to take the JN0-532 exam. Testinside JN0-532 test questions have comprehensive questions, with verified answers researched by industry experts.
JN0-532 rapidshare 1. Review the exhibit.
You've been asked to build a route-based hub and spoke network, with policy control for traffic travelling from spoke to spoke. Which two of the following configuration options will meet this requirement? (Choose two.)
A. Place the spoke tunnel interfaces in the trust zone and create policies on the spokes.
B. Place the spoke tunnel interfaces in the untrust zone and create policies on the spokes.
C. Create a single tunnel interface in the trust zone at the hub and enable intra-zone blocking.
D. Create separate tunnel interfaces at the hub and place them in different zones, then create policies at the hub.
Answer: BD
2. You have created a virtual router called VSYSA-vr and made it shareable. You then create the VSYS using the WebUI, telling it to use an existing VR and selecting the VR called VSYSA-vr.
What is the status of the virtual router after you create the VSYS?
A. The router will be the default router but will no longer be shared.
B. The router will be the default router and will still have a shareable status.
C. The system will not let you use a shared virtual router when you create a new VSYS. The initial virtual router must be private.
D. The system will not create a private vr for the VSYS but will assign the untrust-vr as the default router. The shared Virtual router will not be the default router.
Answer: B
