How to Build a Living Garden Bench
- 1). Remove the grass in the 2-by-4-foot area where you would like your living bench. Make sure it is in an area that receives full sun and has easy access to water, as the bench cannot be moved.
- 2). Lay out the plywood or waferboard sheets on the ground. Nail stakes to each board--with your hammer and 10D nails--every foot along the flat length of each (starting and finishing at the ends), so the pointed ends protrude about 10 inches from the bottom of the sheet of wood.
- 3). Water the ground where you will construct the bench with your hose to soften the soil.
- 4). Push each piece of staked wood into the ground (with the stakes on the outside) to form a rectangle form that measures 4 feet long, 2 feet deep and 2 feet tall.
- 5). Shovel soil into the form. Once a foot of soil is in place, lightly water the soil and tamp the soil down with your feet to make sure it forms a solid foundation for your bench, according to ReadyMade magazine online. Add another foot of soil, water it in, and compress again.
- 6). Remove the form. Work carefully so as not to disturb the soil. Make any necessary repairs by adding damp soil.
- 7). Apply handfuls of starter fertilizer across the top and to the damp sides of the bench.
- 8). Unroll your sod strips. Sod is generally sold in 20-by-40-inch strips, according to Stauffers of Kissel Hill Garden Centers. Lay the strips over the top of the bench so there is an 8-inch overhang on each side.
- 9). Tile the ends and the remainder of the sides of the bench with sod, cutting as necessary with a serrated knife. Attach the sod to the vertical surfaces of the bench using U-shaped metal landscape staples.
- 10
Water frequently and do not sit on the bench for several weeks, until the sod becomes rooted.
