Information On Lawn Sprinklers And Well Pumps For Lawn Irrigation Systems In St. Petersburg
The most beautiful and sprawling emerald lawns can be seen all throughout St. Petersburg, Clearwater and Pinellas Park in Pinellas County, Florida. It should not come as a surprise that there is a very high demand for efficient lawn irrigation systems in these areas. Property owners who already have such lawns or who are still contemplating the laying down of such lawns will surely appreciate facts about the many types of lawn sprinklers and well pumps used in lawn irrigation systems in St. Pete, Clearwater and Pinellas Park in Pinellas County.
The need for proper lawn irrigation systems and lawn sprinkler systems is further magnified by the quality of the soil in the state coupled with the weather conditions in the state of Florida. The average rainfall of 52 to 60 inches received by Florida each year is unfortunately unevenly distributed. More than half of that rainfall comes within the four months of June to September whereas the winter and spring months are relatively dry. This does not bode well for the state which has mostly sandy soil. This is because such soil does not have much capacity to hold water. After only a few days without rain the condition of sandy soil approaches drought levels. This is dangerous to the survival of plants with shallow roots that can only absorb water from the upper six to 12 inches of the soil. In sandy soil, this upper layer becomes the driest. Lawn grass has shallow roots and belongs to the threatened types of plants in these situations.
Lawn irrigation systems use three different types of pumps. These are the surface centrifugal pump, the jet pump, and the submersible centrifugal pump. In choosing which pump to use, one must take into consideration the source of water, the rate of the water flow and the operating pressure required by the system. The sources of water are usually a surface water supply or a deep water well. The operating pressure of the irrigation system is lowered by the friction from the water as it passes through the pipes, fittings and valves. The pressure is also either raised or lowered by the particular topography of the area.
The well pumps are connected to the lawn sprinkler system by pipes that are laid a foot beneath the soil. Water is brought from the well pumps to be sprayed by the lawn sprinklers on the lawn, garden or flower beds.
There are also three different types of sprinkler systems comprised of spray head sprinklers, rotary sprinklers and oscillating sprinklers. In choosing which sprinkler to use, one must take into consideration the application in which it will be needed, the required operating pressure of the system, the needed rate of precipitation and the size of the area that has to be watered.
Spray head sprinklers can be lawn spray head sprinklers, bed spray head sprinklers or shrub spray head sprinklers. All of them need an operating pressure of 15 to 30 psi. Bed spray head sprinklers and shrub spray head sprinklers have stationary heads that are raised. Lawn spray head sprinklers, however, can have either stationary or retractable heads.
Rotary sprinklers can be stationary or retractable. Both types of rotary sprinklers need an operating pressure of 25 to 80 psi and have a spraying pattern that is either circular or half circular, covering bigger areas.
Oscillating sprinklers spray water in a rectangular pattern for an area of up to 20 by 30 feet, using a metal arm moving forwards and backwards.
It is best to purchase water wells, well pumps and lawn sprinkler systems from a respected supplier that also offers lawn sprinkler systems repair and maintenance in St. Petersburg, Clearwater and Pinellas Park in Pinellas County.
The need for proper lawn irrigation systems and lawn sprinkler systems is further magnified by the quality of the soil in the state coupled with the weather conditions in the state of Florida. The average rainfall of 52 to 60 inches received by Florida each year is unfortunately unevenly distributed. More than half of that rainfall comes within the four months of June to September whereas the winter and spring months are relatively dry. This does not bode well for the state which has mostly sandy soil. This is because such soil does not have much capacity to hold water. After only a few days without rain the condition of sandy soil approaches drought levels. This is dangerous to the survival of plants with shallow roots that can only absorb water from the upper six to 12 inches of the soil. In sandy soil, this upper layer becomes the driest. Lawn grass has shallow roots and belongs to the threatened types of plants in these situations.
Lawn irrigation systems use three different types of pumps. These are the surface centrifugal pump, the jet pump, and the submersible centrifugal pump. In choosing which pump to use, one must take into consideration the source of water, the rate of the water flow and the operating pressure required by the system. The sources of water are usually a surface water supply or a deep water well. The operating pressure of the irrigation system is lowered by the friction from the water as it passes through the pipes, fittings and valves. The pressure is also either raised or lowered by the particular topography of the area.
The well pumps are connected to the lawn sprinkler system by pipes that are laid a foot beneath the soil. Water is brought from the well pumps to be sprayed by the lawn sprinklers on the lawn, garden or flower beds.
There are also three different types of sprinkler systems comprised of spray head sprinklers, rotary sprinklers and oscillating sprinklers. In choosing which sprinkler to use, one must take into consideration the application in which it will be needed, the required operating pressure of the system, the needed rate of precipitation and the size of the area that has to be watered.
Spray head sprinklers can be lawn spray head sprinklers, bed spray head sprinklers or shrub spray head sprinklers. All of them need an operating pressure of 15 to 30 psi. Bed spray head sprinklers and shrub spray head sprinklers have stationary heads that are raised. Lawn spray head sprinklers, however, can have either stationary or retractable heads.
Rotary sprinklers can be stationary or retractable. Both types of rotary sprinklers need an operating pressure of 25 to 80 psi and have a spraying pattern that is either circular or half circular, covering bigger areas.
Oscillating sprinklers spray water in a rectangular pattern for an area of up to 20 by 30 feet, using a metal arm moving forwards and backwards.
It is best to purchase water wells, well pumps and lawn sprinkler systems from a respected supplier that also offers lawn sprinkler systems repair and maintenance in St. Petersburg, Clearwater and Pinellas Park in Pinellas County.
