Importance in the Construction of Cabinets
This day's renovation of the house always starts with the smallest change in the house.
Moreover these cabinets are used for storing materials and stuffs inside in order to make the house tidy.
Therefore whiling building a cabinet, not only on its design and outer part is the point of consideration even the construction of the cabinet are need to made properly.
For constructing a cabinet certain things like a cabinet door embedded with design which we want, cabinets, knobs, pulls and hinges are required.
Another essential thing for cabinet construction is that if the cabinet is a wooden cabinet a good quality wood has to be provided.
This is because as a cabinet has six side faces or carcasses.
Therefore the majority part of the cabinet body is then consist of wood.
On the fifth side of the cabinet there is the cabinet doors.
For wooden cabinet the cabinet faces are build with solid and hard wood in order to make it effective.
Though people prefer plywood instead of solid wood these days, as solid wood cost more than the plywood.
Moreover the wood should of such quality that it is specially protected from the moisture.
The next important thing in cabinet construction is the cabinet carcass which is completely made out of plywood the typical plywood thickness of 3/9 inch to 3/3 inch is used in the carcasses.
Apart from this interior construction of the cabinet if two or three shelves or drawers are being added are made out of plywood only.
Strength and stiffness are the two essential requirements of the cabinets so that it does not sag or bend due to heavy load when put inside it.
In this case for interior construction the high quality particle board or plywood is being preferred over solid wood even as this is moisture resistant.
The next thing which comes into consideration is the doors and frames of the wooden cabinets.
The design on the doors has to be made very crucially s o that it goes with the decoration of the house as well.
The door can be fashioned with a hard solid wood or a particle wood or plywood depending upon the choice and money we are investing.
The floating panel of the door of the wooden cabinet has to be hard solid wood made veneer plywood put within MDF made frame or a solid wood.
The problem with particle board used in the door is that it cannot be made round edge shaped, but the mdf or solid wood can be made round edged shaped.
The cabinet hinges knobs and pulls also plays a great role like the door and the wood for its body only.
As these are the integral part of a cabinet and provides support for it, it is very much essential that hinges should be of proper quality.
Therefore only putting up a cabinet for the decoration of the house is not only the sole thing, the construction is also needed to be made properly in order to bear load.
Moreover these cabinets are used for storing materials and stuffs inside in order to make the house tidy.
Therefore whiling building a cabinet, not only on its design and outer part is the point of consideration even the construction of the cabinet are need to made properly.
For constructing a cabinet certain things like a cabinet door embedded with design which we want, cabinets, knobs, pulls and hinges are required.
Another essential thing for cabinet construction is that if the cabinet is a wooden cabinet a good quality wood has to be provided.
This is because as a cabinet has six side faces or carcasses.
Therefore the majority part of the cabinet body is then consist of wood.
On the fifth side of the cabinet there is the cabinet doors.
For wooden cabinet the cabinet faces are build with solid and hard wood in order to make it effective.
Though people prefer plywood instead of solid wood these days, as solid wood cost more than the plywood.
Moreover the wood should of such quality that it is specially protected from the moisture.
The next important thing in cabinet construction is the cabinet carcass which is completely made out of plywood the typical plywood thickness of 3/9 inch to 3/3 inch is used in the carcasses.
Apart from this interior construction of the cabinet if two or three shelves or drawers are being added are made out of plywood only.
Strength and stiffness are the two essential requirements of the cabinets so that it does not sag or bend due to heavy load when put inside it.
In this case for interior construction the high quality particle board or plywood is being preferred over solid wood even as this is moisture resistant.
The next thing which comes into consideration is the doors and frames of the wooden cabinets.
The design on the doors has to be made very crucially s o that it goes with the decoration of the house as well.
The door can be fashioned with a hard solid wood or a particle wood or plywood depending upon the choice and money we are investing.
The floating panel of the door of the wooden cabinet has to be hard solid wood made veneer plywood put within MDF made frame or a solid wood.
The problem with particle board used in the door is that it cannot be made round edge shaped, but the mdf or solid wood can be made round edged shaped.
The cabinet hinges knobs and pulls also plays a great role like the door and the wood for its body only.
As these are the integral part of a cabinet and provides support for it, it is very much essential that hinges should be of proper quality.
Therefore only putting up a cabinet for the decoration of the house is not only the sole thing, the construction is also needed to be made properly in order to bear load.
