How to Mount a 3.5 PU Scope to a Mosin Nagant
- 1). Open the rifle's action and make sure that your weapon is unloaded.
- 2). Loosen the retention screw that's located at the back of the mount base, so that the scope mount will slide out of the base and separate the base from the mount.
- 3). Line up the screw holes on the mount base with those on the rifle and use the provided screws to secure the base to the rifle.
- 4). Slide the scope mount into the base and secure it with the screws at the front and back of the base.
- 5). Tighten the large retention screw to firmly secure the mount.
