Mount Installation

• 1). Inspect your Benelli shotgun to make sure it is unloaded prior to installing a scope.
  
  
• 2). Remove the pre-installed scope mounting screws found on top of the shotgun with a small, slotted screwdriver. The function of these screws is simply to fill the screw holes.
  
  
• 3). Position your Weaver-style scope base on top of your shotgun; align the holes in the base with the holes in the shotgun. Using the screws included with the base, secure the scope base to the shotgun.
  
  

Scope Installation

• 1). Separate the halves of the Weaver-style scope rings. Place the rings on your scope and partially tighten with the Allen wrench included in the ring package.
  
  
• 2). Loosen the retention screws at the base of the scope rings and expand the mounting bracket. The mounting bracket is the part that will secure your scope rings to the scope mount.
  
  
• 3). Align the ring retention screws with the slots cut across the mount base.
  
  
• 4). Align the mounting bracket with the sides of the scope mount. Tighten the retention screws.
  
  
• 5). Position the scope as desired. Finish tightening the screws on the rings.