How to Install Gorilla Bottom Above-Ground Pool Floor Padding
- 1). Examine the area where you plan to install your above-ground pool. Excavate the ground, if necessary, to remove any rocks and debris that can damage the bottom of the pool.
- 2). Create a flat and level surface for the pool on the excavated area with a roller or a plate compactor.
- 3). Assemble the frame of your above-ground pool, but do not install the pool liner in the pool.
- 4). Place the Gorilla Pad inside the pool frame and lay it on the ground. The Gorilla Pad will come pre-cut to the dimensions of your pool.
- 5). Trim off any excess Gorilla Pad along the edges of the frame with a utility knife, so that the pad lies flat on the ground.
- 6). Examine the Gorilla Pad to make sure that it is positioned flat on the ground without any wrinkles. If you see any wrinkles, they will need to be smoothed out.
- 7). Install the pool liner in the pool and then fill up the pool with water to complete the installation.
