Working at factories, machine shops or car repair shops would mean that you also work with a lot of oil, grease and lubricants.
And as you should already know by now, not all wipers are effective in cleaning and removing these oil-based products.
Oil simply tends to stick a lot stronger to any surface and it will not evaporate when left on its own.
Using rags, cloths or paper napkins are the usual cleaning material used but this does not mean that they are the best at absorbing oil-based messes.
This is why you will need a special type of absorbent to effectively clean and absorb oil spills.
Oil absorbents such as the Spilfyter pads and rolls will make cleaning much easier and faster as compared to using other kinds of wipers.
This is because the Spilfyter absorbents have an enhanced absorbing capacity which makes it absorb oil faster and at a greater capacity.
Aside from this, the material used is dimple bonded to increase the strength of the pads and to resist tearing.
This way, you can still use the pads for wiping and cleaning even after it has absorbed a lot of oils and you are sure that no residues will be left behind.
Another great use of oil-only absorbents is that you can use them for separating water and oil.
If you use an ordinary rag, chances are that it will absorb both oil and water.
But if you need to separate these two liquids, the best way to do it is through the use of Spilfyter oil-only absorbents.
Its material is specially made to absorb oil and oil-based products only thus it will not take up water even if you immerse it in a container full of water.
So if your line of work deals more on oil and other oil-based products, be sure to get the Spilfyter oil-only products for those hard-to-clean spills.