How To Tow Using a GMC Safari
- 1). Determine the total mass of the trailer and cargo. The trailer's weight is printed on its data plate under gross trailer weight.
- 2). Open the Safari's owner's manual and locate its maximum towing capacity. This rating must be more than the weight of the trailer and cargo for a safe trip.
- 3). Connect the trailer's coupler to the van's hitch by lowering it on and locking the latch. Secure the latch in the locked position by pushing a cotter pin through the handle.
- 4). Fasten the trailer's right chain to the left side of the hitch and the left chain to the right side. The crossed chains are required because they catch the trailer's tongue in the event the trailer becomes detached from the vehicle.
- 5). Push the trailer's electrical plug into the vehicle's electrical receiver. Test the operation of the trailer lights by cycling through brake, signal and marker lights and confirming the trailer responds properly.
- 6). Drive slower than normal and leave additional braking space from the vehicle in front of you. The weight of the trailer reduces the braking and handing of the van.
- 7). Turn corners wider around the turn, while still maintaining the lane. The additional length of the trailer has a tendency to cut the inside of the corner and possibly ride up on the curb.
