The question of how to measure house windows can be answered in a variety of ways.
This is because of the different types of windows available and also the different designs of houses.
However, I will present some basic information that will prove useful to you so read right to the end.
Measuring replacement windows before installation is very crucial to the whole project.
This comes before you make any purchase and before touching the old windows.
You need to be certain that the measurements you have are just the right size or else you might run into serious troubles later on.
For example, in most cases vinyl windows are custom-build and they cannot be returned to the store if they don't fit.
One thing you should keep in mind when trying to find answers on how to measure house windows is that most are made or manufactured in ¼ inch increments.
This means that you may not find the exact fit window especially for vinyl ones so you would have to get the fit that is as close to your window size as possible.
In addition, you should have the necessary tools and skill to deal with the leakages that may occur due to the misfit.
Now let me rush through the simple steps that you can take to measure the house windows.
oYou must raise the lower sash in order to measure the width and then measure the jamb-to-jamb.
Do the measurements in 3 places i.
e.
in the middle, near the top and then close to the bottom.
oNow for the height, simple from the head jamb up to the sloped sill.
This is just part where it meets the inside window stool.
oNever make the mistake of assuming that all your windows are the same.
You need to measure each window separately and be careful not to mix the values.