How do I Program a Broksonic Remote Control?
- 1). Turn on your Broksonic television by pressing the "Power" button on the television. The power button will either be on the top of the television or on the front panel of the television.
- 2). Press the "TV" button on the remote and release it immediately. A green light will flash once at the top of the remote.
- 3). Press the "Setup" button on the remote and hold the button down until a green light at the top of the remote flashes two times.
- 4). Type in one of the following four-digit codes: "0236," "0463" or "0003." Once completed, the green light at the top of the remote will flash two times again. The codes are compatible with Broksonic remotes, depending on your television, one of the three codes should work.
- 5). Aim the remote at the front of the television and press the "Power" button on the remote. If the code is correct, the television should turn off. If the television does not turn off, then try one of the other codes until the television turns off.
