It will be important for you to know the procedure in measuring tiles if you are renovating your bathroom or any other room with tiled flooring in order for you to accurately cut the tiles to make them fit all portions of the room.
It is also essential for you to determine the dimensions of the room if you are going to purchase tiles since you have to be aware of the number of tiles that you need and the cost for each square foot of tile.
Using the example given, if you are going to renovate your bathroom and replace the old tiles with new ones, determining the dimensions of the tiles will become an important part of the job.
Initially, you must become aware that prior to getting the dimensions of the tile, you need to be aware that there are two kinds of tile which can be used for the bathroom - the trim tile and field tile.
The trim tile is the tile used along the edges of the tiling work.
The field tile, on the other hand, covers most of the major areas of the whole tiling job and it is the main part of the project.
More often than not, field tiles are bought on a per square foot segments with twelve inches by twelve inches as the more popular dimensions.
With the example given as a basis, we will go into the details with the actual measurements for the job.
For instance, you would need to lay down tiles on the three sides of a shower.
It will be important for you to get the height and the three widths of the walls of the shower if you want to know the number of tiles required for it.
After getting measurements for the three widths and the height, you would have to get the sum of the three widths and multiply it with the height.
The product will be the total area that your tiles need to cover and the number of tiles you have to buy.
It is however advisable for you to have an extra twenty percent in order to avoid problems if some of the tiles will be damaged since the figure will be the actual area to be covered.
In addition, always round up the number if you make an educated guess on the dimensions of the width or height.
You may not have enough tiles to use if in case you will round down the estimate.
Tiling the edges of the room will not be as difficult as tiling the center portion of the room.
The dimensions of the three walls, which you previously measured, are the only things needed for this.
Another thing to resolve would be the height of the border, a measurement that you can do without.
In its place, you can decide on the where the edges of the bathroom or the shower are supposed to begin.
Since it will be a rather difficult job to renovate your bathroom as well as the other rooms in the house, it is advisable to ask someone else to assist you in the job, which will necessitate a lot of hard work in order for you to properly accomplish the job.
You will be able to start off on the right foot by knowing the procedure in measuring the tiles properly after reading through this article.