SEAMLESS WALL COVERING
Seamless wall covering are easily washable.
These wall covering can be easily installed in any place where the ambient temperature is above then 15° Celsius (60° Fahrenheit). Before installing these wall just remove the old wallpaper and peeling paint from the wall. Make the wall surface dry, ¬rm, smooth, free from grease and dust and slightly absorbent and fill up the cracks and holes with the oil free product which will increase the life of the wall coverings. These wall s are Water-repellent, antistatic treatment, mould resistant, anti-bacterial treatment, house dust mite resistant.
A wall covering is a feel like you belong in a place with purpose, or a place to make a decision. The wrong atmosphere can alienate (unfriendly environment) a buyer, but the right one can create a lifelong devotee. These Seamless Wall can create a good imprecation on the anybody including the one who are working there nd those who are coming there or service.
There are various advantages of seamless wall covering which are as under following:
€ No problems with seams,
€ Very durable quality,
€ Does not shrink,
€ Dimensional stability,
€ Quick installation which will save our time and costs.
€ These wall can be sponged at time of hanging
€ Seamless Wall are also resistance to dry rubbing.
€ Pretty good shock resistant
€ These wall covering are dimensionally shink proof.
€ Easily Washable
€ Very less care is required.
€ Easily fits in any budget.
€ Very good flame (fire) retardant complies with the fire standards.
Tools required for the installation
No need of any special tools work can be done by using simplest equipment:
A cutting knife, a flat brush to smoothen out, a spatula, a measuring tape, a plumb line, a long-bristled paint roller (15 mm) and fine saw.
These tools are easily available and can be easily use no need of any expatriation in using these.
INSTALLATION
There are very simple steps to install this wall covering which are as under following:
€ Cut the roll at the distance between the ceiling and floor.
€ Apply the adhesive directly to the wall in vertical strips.
€ Spread the adhesive evenly, using the paint roller.
€ Don't do anything for few minutes leave the adhesive for few moments until it gets dryer.
€ Press the wall onto the adhesive in an upper corner
€ Smooth out using a clothes brush, starting from the ceiling and coming down to the floor, without applying too much force.
€ With the help of plumb line control the straightness of the Seamless wall and correct if any correction is necessary.
Both the vertical and horizontal seams can be realized in an almost invisible way. Do not rub them by hand! If the seams are still visible then press again.
- Do not use too much adhesive and let it dry well so it does not accumulate. Remove excess adhesive with clean water.
These wall covering can be easily installed in any place where the ambient temperature is above then 15° Celsius (60° Fahrenheit). Before installing these wall just remove the old wallpaper and peeling paint from the wall. Make the wall surface dry, ¬rm, smooth, free from grease and dust and slightly absorbent and fill up the cracks and holes with the oil free product which will increase the life of the wall coverings. These wall s are Water-repellent, antistatic treatment, mould resistant, anti-bacterial treatment, house dust mite resistant.
A wall covering is a feel like you belong in a place with purpose, or a place to make a decision. The wrong atmosphere can alienate (unfriendly environment) a buyer, but the right one can create a lifelong devotee. These Seamless Wall can create a good imprecation on the anybody including the one who are working there nd those who are coming there or service.
There are various advantages of seamless wall covering which are as under following:
€ No problems with seams,
€ Very durable quality,
€ Does not shrink,
€ Dimensional stability,
€ Quick installation which will save our time and costs.
€ These wall can be sponged at time of hanging
€ Seamless Wall are also resistance to dry rubbing.
€ Pretty good shock resistant
€ These wall covering are dimensionally shink proof.
€ Easily Washable
€ Very less care is required.
€ Easily fits in any budget.
€ Very good flame (fire) retardant complies with the fire standards.
Tools required for the installation
No need of any special tools work can be done by using simplest equipment:
A cutting knife, a flat brush to smoothen out, a spatula, a measuring tape, a plumb line, a long-bristled paint roller (15 mm) and fine saw.
These tools are easily available and can be easily use no need of any expatriation in using these.
INSTALLATION
There are very simple steps to install this wall covering which are as under following:
€ Cut the roll at the distance between the ceiling and floor.
€ Apply the adhesive directly to the wall in vertical strips.
€ Spread the adhesive evenly, using the paint roller.
€ Don't do anything for few minutes leave the adhesive for few moments until it gets dryer.
€ Press the wall onto the adhesive in an upper corner
€ Smooth out using a clothes brush, starting from the ceiling and coming down to the floor, without applying too much force.
€ With the help of plumb line control the straightness of the Seamless wall and correct if any correction is necessary.
Both the vertical and horizontal seams can be realized in an almost invisible way. Do not rub them by hand! If the seams are still visible then press again.
- Do not use too much adhesive and let it dry well so it does not accumulate. Remove excess adhesive with clean water.
