How to Install a Blum 70T555-0101 Hinge
- 1). Lay out and drill the hinge mounting hole in the back of the cabinet door. The exact location depends on the chosen mounting plate and the desired door overlay. There are 18 possible mounting positions; see the chart in the Blum catalog for details. Drill the mounting hole 12.7 mm (1/2 inch) deep.
- 2). Drill the hinge screw holes. Place the hinge in the 35 mm drilled hole, with the hinge arm toward the edge of the door. Using the hinge as a guide, drill two screw holes using the self-centering bit.
- 3). Screw the hinge in place.
- 4). Place the axle on the hinge arm into the slot at the front of the mounting plate. Snap the back of the hinge arm in place.
