How to Disassemble Band Hero Drum Kit Legs
- 1). Disconnect the kick pedal cable from the back of the drum pads and then lift the kick pedal off of the bar that connects the feet. Lift the drum pads upwards to remove them from the poles.
- 2). Place your foot on the bar that connects the feet to anchor it to the ground. Pull each pole upwards to remove them from their sockets.
- 3). Open the clasp found half way up each pole. Push the two ends of one pole together so that it retracts and then close the clasp. Repeat this with the other pole.
- 4). Place the tip of a flat head screwdriver under both tabs that secure the connecting bar to one foot. One tab is on the top of the foot and the other is underneath. Simultaneously pry the two tabs on one foot outward and then twist the bar. Pull the bar out and then repeat this on the other foot.
