Proper Storage of Your - Circular Saw Blade.
Using your personal tools occasionally or carpentry is a hobby. You may be an everyday user, or carpentry is your real vocation: never give up the good habit of safe usage and safer storage.
For household tools and metal objects like Circular saw blades and concrete cutting, are very sharp and therefore can be really hazardous. After usage, leaving the Circular saw blades and concrete cutting, carelessly exposes your children, pets and others to an accident. Do not leave them inside a box of tools or leave it on your work station, for anyone accessing may not be aware and therefore could cut them. Storing the Circular saw blades and concrete cutting, away from anyone's reach, the best option is to have a storage rack mounted on the wall. This is the cheapest and most convenient method of keeping it safely as well as in a ready to use top condition.
As per experts at worlddiamondsource, sharpness is the key trait for any circular saw blade and concrete cutting. A blunt blade can be unsafe. Blunt blades when used will result in uneven sawing and throwing off the wood into your sensitive eyes. An irregular carpentry work should not be expensive to replace old blade with a new and properly sharp one. A proper storage will avoid moisture and rusting or decay.
You can make yourself an excellent wall-mounted rack for storing the blades for a longer utility. Worlddiamondsource suggests you do-it-yourself by following these simple steps.
Steps in making a Wall Mounted Rack for Circular saw blades and concrete cutting, Worlddiamondsource:
We shall start by taking 2 rectangular blocks of good wood. One with dimensions 12 inch by 6 inch to be used as: wall-mounted base. The other 12 inch by 5 inch to be used as: blade holder.
Make 2 pilot holes along the left of the 12 inch side of the base frame, using a nice drill. The holes centered approximately 2 and half inch from the top and similar from the bottom edge.
Fix wooden blade holder vertically, round the two left corners by using a router.
Now, you must slice a series of five blade slots, along the same side of the blade holder, which you have rounded the corners of.
Make the cuts using a miter saw 1 and half inch apart, 3 and half inch deep and placed angular at 45 degrees. Left side has 5 parallel cuts; the right side of frame is solid wood. Now lay the blade holder flat, positioning the cuts to the left and the solid edge to the right. Now along the solid edge, drill 2 pilot holes with a 3/16-inch drill bit. These holes should be 1/6 inch from the right edge, 3 inches from the top and 3 inches from the bottom edge.
Keeping the 2 pieces at right angles, so that the pilot holes do line up. Screw both to form a wall rack in L shape. The base now is the back; the blades are conveniently stacked in the blade holder.
Now drill 2 more holes in the base. So hat when holding it vertical, holes is centered 2 inches from the top and bottom edges. These holes will help us to hang the wall rack.
The next step is the mounting of the wall rack using wood screws & wall studs. Now we carefully slide the rotary blades into each slot. Around half inch of blade is to the left of the holder, the larger portion of the blade will be to the right side, and fronting the wall-mounted base.
This very simple and creative task will not just help you store the Circular Blades properly; it will also satisfy your creative and constructive spirits. There is no further danger of any accidents on account of Circular Blades lying around, will be a cause to have a peaceful sleep.
There are a few very simple but effective Care tips from Worlddiamondsource to help you maintain Circular saw blades and concrete cutting.
CARE TIPS
If a blade is cracked or deformed, do not keep it, it's better to throw it away.
Always see that blade is properly sharpened. It may be dangerous and might end up severely cutting the user.
Do not use your saw blades for cutting of metal; it will cause sparks that might easily flare up.
For household tools and metal objects like Circular saw blades and concrete cutting, are very sharp and therefore can be really hazardous. After usage, leaving the Circular saw blades and concrete cutting, carelessly exposes your children, pets and others to an accident. Do not leave them inside a box of tools or leave it on your work station, for anyone accessing may not be aware and therefore could cut them. Storing the Circular saw blades and concrete cutting, away from anyone's reach, the best option is to have a storage rack mounted on the wall. This is the cheapest and most convenient method of keeping it safely as well as in a ready to use top condition.
As per experts at worlddiamondsource, sharpness is the key trait for any circular saw blade and concrete cutting. A blunt blade can be unsafe. Blunt blades when used will result in uneven sawing and throwing off the wood into your sensitive eyes. An irregular carpentry work should not be expensive to replace old blade with a new and properly sharp one. A proper storage will avoid moisture and rusting or decay.
You can make yourself an excellent wall-mounted rack for storing the blades for a longer utility. Worlddiamondsource suggests you do-it-yourself by following these simple steps.
Steps in making a Wall Mounted Rack for Circular saw blades and concrete cutting, Worlddiamondsource:
We shall start by taking 2 rectangular blocks of good wood. One with dimensions 12 inch by 6 inch to be used as: wall-mounted base. The other 12 inch by 5 inch to be used as: blade holder.
Make 2 pilot holes along the left of the 12 inch side of the base frame, using a nice drill. The holes centered approximately 2 and half inch from the top and similar from the bottom edge.
Fix wooden blade holder vertically, round the two left corners by using a router.
Now, you must slice a series of five blade slots, along the same side of the blade holder, which you have rounded the corners of.
Make the cuts using a miter saw 1 and half inch apart, 3 and half inch deep and placed angular at 45 degrees. Left side has 5 parallel cuts; the right side of frame is solid wood. Now lay the blade holder flat, positioning the cuts to the left and the solid edge to the right. Now along the solid edge, drill 2 pilot holes with a 3/16-inch drill bit. These holes should be 1/6 inch from the right edge, 3 inches from the top and 3 inches from the bottom edge.
Keeping the 2 pieces at right angles, so that the pilot holes do line up. Screw both to form a wall rack in L shape. The base now is the back; the blades are conveniently stacked in the blade holder.
Now drill 2 more holes in the base. So hat when holding it vertical, holes is centered 2 inches from the top and bottom edges. These holes will help us to hang the wall rack.
The next step is the mounting of the wall rack using wood screws & wall studs. Now we carefully slide the rotary blades into each slot. Around half inch of blade is to the left of the holder, the larger portion of the blade will be to the right side, and fronting the wall-mounted base.
This very simple and creative task will not just help you store the Circular Blades properly; it will also satisfy your creative and constructive spirits. There is no further danger of any accidents on account of Circular Blades lying around, will be a cause to have a peaceful sleep.
There are a few very simple but effective Care tips from Worlddiamondsource to help you maintain Circular saw blades and concrete cutting.
CARE TIPS
If a blade is cracked or deformed, do not keep it, it's better to throw it away.
Always see that blade is properly sharpened. It may be dangerous and might end up severely cutting the user.
Do not use your saw blades for cutting of metal; it will cause sparks that might easily flare up.
